In short: you most likely need a power flush when several radiators are cold along the bottom, the water is dark when you bleed them, and the whole house takes ages to warm up. If it's just one radiator, or only the top of a radiator is cold, it's usually something simpler.
Free 30-second check
Heating symptom checker
Tick anything you've noticed. There are no wrong answers, and nothing is sent anywhere.
This is a guide, not a diagnosis. An engineer always confirms the cause before recommending any work.
Know the signs
What sludge does to your heating
Over the years the steel inside radiators slowly rusts on the inside. The rust turns into a thick black sludge (magnetite) that settles at the bottom of radiators and in the pipes. It blocks the flow of hot water, so radiators stay cold at the bottom, rooms take longer to warm up, and the boiler and pump have to work harder, which costs you more in gas and can shorten the boiler's life.
Usually means a power flush
- Several radiators cold at the bottom
- Dark brown or black water when bleeding
- The whole system slow to warm up
- An older system that has never been cleaned
- A boiler that bangs or "kettles"
Usually a smaller fix
- Cold at the top only: trapped air, so the radiator just needs bleeding
- One cold radiator: often a stuck valve or air
- Some rooms hotter than others: the radiators need balancing
- A newer system with a magnetic filter: often just a service and filter clean
No hard sell
How we work out what your system needs
Talk it through
Which radiators, which rooms, and what the water looks like.
Check the system
Radiators top and bottom, boiler, pump, valves and pressure.
Test the water
A quick look at the water shows how much sludge is in the system.
Recommend the right fix
A power flush only if sludge is the real cause. Otherwise, the smaller fix.
Prices
What does a power flush cost?
Every system is different, so we give you a clear, fixed price once we know your system. It mainly depends on:
- How many radiators you have
- How much sludge is in the system
- Access to the boiler and radiators
- Whether a magnetic filter is fitted (or should be)
You'll know the full price before any work starts. No surprises.
Get a clear priceGood questions
Power flush questions
Will a power flush fix a single cold radiator?
Usually not. One cold radiator is normally a local problem such as trapped air, a sticking valve or poor balancing. Those are quick fixes, so we check them first.
How can I tell sludge from trapped air?
Air collects at the top, so the radiator is cold at the top and warm at the bottom, and bleeding it fixes it. Sludge settles at the bottom, so the radiator is cold at the bottom, and the water you bleed out is dark.
Should I get a power flush before a new boiler?
A new boiler should go onto a clean system. Fitting one onto dirty water can affect its warranty and efficiency. Whether that needs a full power flush or a lighter clean depends on the state of your system, and we'll tell you which.
Can't I just add inhibitor?
Inhibitor helps protect a clean system from new corrosion, but it doesn't remove sludge that's already there. A dirty system needs cleaning first, then inhibitor to keep it clean.
How long does a power flush take?
Most homes take most of a day, depending on the number of radiators and how dirty the system is. We'll give you a time when we confirm the price.
Will it make a mess?
We protect the floors around radiators and the boiler, and take the dirty water away with us. Your home is left clean and tidy.
Not sure yet?
Get an honest answer from an engineer
Tell us what's happening with your heating and we'll call you back. If a power flush isn't what you need, we'll tell you.